Видео

That fiberglass shower will outlast any tile shower just saying

It looks like junk its to easy

This guy is fantastic.

Hi, thank for the video. Do I have to use a carbide blade? I have just a regular blade Multi-tool, will that work? thanks

Do it properly like some trolls say ?? Yeah right! Spend 10K - 15K to do it "right". This works fine and you may do the Downspout extensions to get water away from house is good idea as well.

who puts a shower drain through ductwork dumbest thing I’ve ever seen

I'm replacing plaster walls with sheet rock. Should I use fiber glass insulation or spray form on the outer walls?

Can it be done over slab tiles without removing the tiles.

Can you get this on without removing the door?

Hello Jeff. I removed out tube and wanted to move and convert to PVC. However, All the old pipes and P trap a brass. Any recommendation.

Hello Jeff, Can I put another 1/2" plywood over the 3/4 subfloor then install the pan. It give more support I thinks.

So I have a few questions if it not a bother. For my toilet flange, it sit about 1/4 up, and I have to add that much. Is it okay if the toilet flange is flush with the ground? 2nd, the pink foam role for expansion, how did you finish that part. Did you cut it flush with the ground after everything cured?

Man this is a really well done video. Super concise with easy to understand steps along with the fast video. This, along with leaving out fluff. Well done

How would you repair cracks in a concrete driveway... some are 1 inch+ deep? I've read it's good to use rod bar (cylinder piece of rubber) in large cracks.

I am a 4yr old Golden Retriever, and was able to unclog the bathroom sink for my owners while they were at work! Thank you for your help, video was outstanding❤

What a nice cut! It looks great! Everyone will think so the next time the toilet is removed 😂

Another banger video

That cut looks like crap!

What a GREAT Video !!! Very Informative!! thanks !!!

What a Great Video !!!

Is this still considered modern or is it dated?

Informative. No wasted time. Explained what he was doing at each step. 10/10

well done! Looks clean!

Super simple yet we still get questions. Now, follow these 87 easy steps.

HI ✋️is there a multi purpose adhesive for sticking down decoupling waterpoof membrane and also using stick down tiles onto😢 membrane? Using the same adhesive?

👌👏👏

talking too fast and too fast video; not beginner friendly.

None of my P traps have rubber gaskets, here in El Paso, is this normal?

Hi, I am having a hard time understanding this. I have read that the slope for a curbless shower should be a minimum slope of 1/4" (0.25") and the maximum slope should be 1/2" (0.5") per foot. And this should be from the drainage out to all directions until the height of 2" is reached. So follow the rule detailed above a curbless shower with a slope of 1/4" (0.25") should have a distance of 8'. 1/4" (slope) x 8' (distance) = 2" (shower pan height requirement). If we follow the established rule with a 1/2" (0.25) slope then the distance should be 4'. 1/2" (slope) x 4' (distance) = 2" (shower pan height requirement) What am I doing wrong here? Please help me understand this.

Hi, I am having a hard time understanding this. I have read that the slope for a curbless shower should be a minimum slope of 1/4" (0.25") and the maximum slope should be 1/2" (0.5") per foot. And this should be from the drainage out to all directions until the height of 2" is reached. So follow the rule detailed above a curbless shower with a slope of 1/4" (0.25") should have a distance of 8'. 1/4" (slope) x 8' (distance) = 2" (shower pan height requirement). If we follow the established rule with a 1/2" (0.25) slope then the distance should be 4'. 1/2" (slope) x 4' (distance) = 2" (shower pan height requirement) What am I doing wrong here? Please help me understand this.

I am 57 years old and my brother passed away last year I took over his home which was barely livable and I am trying to remodel it on my own with free stuff off of Craig's list I work full time but money is tight as I am raising my 8 year old grandson I could really use this tool

Does the schluter sit on top of or next to the edge of the kerdi membrane?

will any type of trim fit this rough?

I’m only 12 months old. My mom told me that I’m the man of the house now and then kicked my dad out. I figured I’d need to learn how to unclog a sink now that I’m responsible for maintaining our home. This video really helped, thank you for uploading it.

Water was shooting from the top of my original fill valve. I had to be replace it. I was able to easily replace my damaged fill valve with the same product used in your video and thanks to your steps. Thank you.

Thanks!

Thankz🎉

That kickback tio probably saved a few fingers😂. Great video 👍👍

Polishing any tile that’s getting covered up is a waste of time

Problem is when you unscrew the piping under the sink is the old seals may need replaced because when they're screwed back you might get a small leak, and the turning of the pipes can impact the actual drain hole on sink,and you may need special pliers or footprints to remove or tighten that!

i finally learned something new. thx bro

Repost this tutorial with the box recessed into the brick and don’t leave exposed cable.

❤❤

Nice one

I would of used a v notch trowel 1/8 square trowels is a lil to much mud and u have thinset pushing through your joints easier to use v notch

Thank you for your teaching

Is cement board actually not water proof?